7000 Series

The PA 7000 series needlepoint air ion generators are commercial quality units intended for installation in air handling units (AHU), furnaces, or duct systems for commercial applications. The number of units and the quantity of the ionization outlets are dependent on the airflow in the system and the severity of the indoor air pollution problem.

Voltage

24V AC / 120V AC to 12V DC wall pack, 120V / 240V AC to 12V DC power supply, 241V / 277V AC to 12V DC power supply

Energy use

1, 2, 3, 4 watts

Capacity

Up to 6,000 CFM

No. of ionization outlets

1, 2, 3 or 4

Plasma BAR Series

The Plasma BAR is a commercial quality, remote mounted needle point ion generator intended for installation in air handling units (AHU) and rooftop units (RTU). The Plasma BAR is available in lengths of 18 inches up to 96 inches in 6 inch increments to suit a wide variety of AHU or RTU size applications.

Voltage

24V AC or 12V DC. Power supply provided for 120V - 230V

Energy use

1.5 watts/LF

Capacity

Up to 20,000 CFM. Multiple BARs can be used.

Plasma BAR-X Series

The Plasma BAR-X is a commercial quality, needle point ion generator intended for installation on the upstream side of the cooling coil in air handling (AHU) and rooftop units (RTU). The Plasma BAR-X is available in lengths of 18 inches up to 144 inches in custom lengths to suit a wide variety of AHU or RTU size applications dependent on the internal cross- sectional dimensions of the applicable AHU or RTU coil and the severity of the indoor air pollutants.

Voltage

120V AC / 230V AC

Energy use

60 VA

Capacity

Up to 30,000 CFM

No. of ionization outlets

1 outlet every 0.75"

600 Series

The PA 600 series are needle point brush type ionizers producing an equal amount of positive and negative ions neutralizing harmful pollutants and odors. This self balancing unit is highly versatile as it may be installed at the fan inlet of an air handling unit, fan coil unit, PTAC, heat pump and a VRF ductless split system.

Voltage

12V DC / 24V AC / 120V AC / 240V AC

Energy use

< 1 watt

Capacity

Up to 2,400 CFM. Multiple units can be used.

50 Series

The PA 50 series ion generators are 5 tube industrial quality units intended for installation in air handling units or in duct systems for commercial and industrial facilities. The number of units and the size of the ionization tubes are dependent upon the airflow in the system and the severity of the pollution problem.

Voltage

120V AC / 230V AC

Energy use

30, 50 watts

Capacity

Up to 10,000 CFM

100 Series

The PA100 series air ion generators are single tube commercial quality units intended for installation in air handling units (AHU), furnaces, or duct systems for residential, commercial and industrial applications. The number of units and the size of the ionization tubes are dependent on the airflow in the system and the severity of the pollution problem.

Voltage

120V AC / 230V AC

Energy use

8 watts

Capacity

Up to 3,000 CFM. Multiple units can be used.

200 Series

The PA 200 series air ion generators are two tube commercial quality units intended for installation in air handling units (AHU), furnaces, or duct systems for residential and commercial applications. The number of units and the size of the ionization tubes are dependent on the airflow in the system and the severity of the pollution problem.

Voltage

120V AC / 230V AC

Energy use

16 watts

Capacity

Up to 5,000 CFM. Multiple units can be used.

PlasmaPURE 600 Series

PlasmaPURE 600 provides safe and continuous air purifcation to the entire home using patented brush-style bipolar inoization technlogy. Easily installs in furnace, AC unit or ductless mini split.

Voltage

12V DC / 24V AC / 120V AC / 240V AC

Energy use

< 1 watt

Capacity

Up to 2,400 CFM. Multiple units can be used.

PlasmaPURE 7000 Series

PlasmaPURE 7000 provides safe and continuous air purifcation to the enire home using patented needlepoint bipolar inoization. Unit easily installs directly onto HVAC system ductwork.

Voltage

24V AC / 120V AC to 12V DC wall pack, 120V / 240V AC to 12V DC power supply, 241V / 277V AC to 12V DC power supply

Energy use

1, 2, 3, 4 watts

Capacity

Up to 6,000 CFM

No. of ionization outlets

1, 2, 3 or 4

P1000 Portable

The P1000 is a self contained portable unit designed to increase ionization levels in areas where there is no ventilation system or it is not accessible. The unit contains a fan, pre-filter, carbon filter, and two bipolar ionization tubes all housed in a heavy gauge powder coated steel enclosure. This unit is ideal for environments with high pollutant levels and strong odors.

Voltage

100-240V AC

Energy use

12 watts

Capacity

Up to 200 CFM. Multiple units can be used.

Novaerus Portables

Designed for continuous air disinfection and odor control in small indoor spaces, the Novaerus NV200 and NV900 use patented filter-free ultra-low energy plasma technology. Can be wall-mounted or placed on any surface with a stand and plugs into any outlet.

Voltage

120VAC

Energy use

20 watts

Capacity

Up to 200 CFM. Multiple units can be used.

Ceiling Scrubbers

The Ceiling Air Purification Scrubber is a complete air purification system integrating multilayer filtration, air purification, sterilization and air ionization. The unit contains several technologies including a washable pre-filter, electrostatic precipitator, HEPA filter, activated carbon filter, UVC lamps, photo-catalytic oxidizer, and a bipolar ion generator.

Voltage

120V AC / 230V AC

Energy use

155 watts

Capacity

Up to 300 CFM

Monitoring

Devices to measure negative ions in ambient air (handheld) or in system (Duct or AHU mounted).

Capacity

Measurement range: 0 to 20,000 Negative Ions/cm3

Airflow Switches

A convenient method for powering and mounting a model 100 or 200 ionizer. Equipped with an integral pressure switch which closes at 0.05 Inch WG. Unit is mounted directly to metal duct with sheet metal screws and ionizer is mounted to unit with machine screws.

Voltage

120V AC / 230V AC

Energy use

20 watt max